Alarm.Com MyQ Bedienungsanleitung PDF herunterladen (Seite 24)

Total Connect 2.0 Online Help Guide

– 22 –

Creating an automation scene

Here we will use the Automation module to create a simple scene to control your automation devices during a

vacation. In this scene you want the following scenario to take place when you leave the premises for a

vacation:

• When you leave, the automatic front and rear door locks will lock.

• The living room light will be dimmed to 80%.

• The kitchen light will be dimmed to 80%.

• The porch light will be dimmed to about 25%.

• The electric porch heater will be set to off.

• The main thermostat will be set back to 62 degrees to save energy.

To create the Vacation scene:

1. Click Create New. Then in the Scene Name field, enter the name “Vacation”, then choose an icon.

2. In the device area, ensure the ALL filter is activated so you can see every device. Use the scroll left and

right arrows if necessary to find the automation device.

3. Since we want the front and rear door locks in the locked mode, check the box by each lock to include it

in this scene. Click the front and rear door lock icons to attain the LOCKED state.

4. Find the living room light device, and check the box to include it in the scene. Set the dimmer slide to

about 80%. Repeat this for the kitchen light, and the porch light, using the dimmer slide to the desired il-

lumination level.

5. Find the porch heater and check the box to include it in the scene. Click the icon to attain the OFF state.

6. Look at each device and ensure only those devices to be included in this scene have their box checked.

7. Set the thermostat to 62 degrees and click the hold button.

8. Save the scene.

9. Click the green Run button to verify the automation devices action. Make any changes as necessary.

Using the scene:

When you leave for vacation you would arm the security system in the normal manner. Then after leaving the

premises use your smartphone or other device to log into Total Connect. At the Automation module, select

the “Vacation” scene and click run.

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 49 50

Keine Kommentare

Alarm.Com MyQ Bedienungsanleitung Seite 24